Hadn't noticed the quantity...the ones we had been buying were non- RoHS standard, and I bought the last 22 they had of those, last week or so, and they were cheaper yet, because they were close-out, discontinued. They did send me two of the new ones two days later, and I hadn't thought about the quantity. These must be the first, hopefully of many they get - I like saving money! Especially since I have bought 200 or so of them, so far...
cenote wrote: OK, I'll throw it out there...
Anybody interested in including parts for SSRoz boards? There running $11.50 per board.
Now everybody logoff...Wives getting upset.
I am making the SSRNeon boards, that David Jones designed at DIYC - I like them because they are very versatile - it uses a cheap fuse holder, as opposed to the enclosed one, plus, it has neutral terminals on the board, instead of the "pigtail" like the Oz one does. It also has a cheap neon bulb for 120 V present, which is nice to have also. It is slightly larger than the Oz, but I like it a lot better. Oh yeah, the board is also designed to use spade terminals, instead of the expensive screw terminals, if you desire, without any changes to the board...hopefully, I'll post a picture of it here:
The neon isn't on this board, yet, but goes next to the screw terminals, "AC Present". And on the other picture, if you look in front of the screw terminals, you'll see the holes for the spade connectors...very cheap design! Especially since I am planning on 256 channels of these, along with the 192 channels of DIO's...Wow, that's WAY too many! But, the neon really lends itself to home-etch...
Since I'm bragging already, here's the DIO SSR's I'll be using - non dimmable, but great for DIO's - again, neutral is on the board. I picked up 250 of the relays, 3 amp!:
Last edited on Thu Mar 26th, 2009 01:13 am by 51fordf2
Time to bump this up. John has contacted me about the production run for the updated board. It's a 30 board order, with 24 coming to me so I can forward them to the folks who wanted them in the US. We will each PayPal John $10 per board to cover his expenses for production and shipping. I'll update this when I get home from work this afternoon. For Chuck Note: I'll PayPal you funds for 6 full parts kits if you are still interested in making a group order. I have no idea how long the order will take, but the first time I did this I had the boards in hand in less than three weeks.
____________________ Evan... Are you at home resting yet? I'm very glad you're feeling better!
Bad news, just checked the availability on parts, and the IC sockets 571-1-390261-1 are out. Back ordered until 4/27. Should we wait and see what happens?
____________________ ---> 160 LOR : 96 DIO : (2) Lamp Timers : EDM Trans
---> 25,000 up...5,000 to go
Disregard the last post...Wrong BOM...There for the ssroz's if anybody is interested.
All parts available for buffer boards. We are about $21.00 each, for parts for 10 boards plus shipping.
____________________ ---> 160 LOR : 96 DIO : (2) Lamp Timers : EDM Trans
---> 25,000 up...5,000 to go
So, they have the RJ45 jacks? We had some serious trouble on another order - backordered until JUNE!!
I had to order 100 from Jameco...
BTW, Jameco has the 6p sockets!! At least they did when I ordered MY 100! 10 cents each...if you are going to be building anything with opto's, you might check Jameco...
Chuck - send me info on who/how/where to pay, and shipping, if you can figure it out...
cenote wrote: Bad news, just checked the availability on parts, and the IC sockets 571-1-390261-1 are out. Back ordered until 4/27. Should we wait and see what happens?
What are those for? That's a 6 pin socket. We need an 18 pin socket for U1 through 6. Let me back track this thread and see if I gave you the wrong number...
Jeff
____________________ Evan... Are you at home resting yet? I'm very glad you're feeling better!
